STENNER PUMPS |
Classic Single Head Pumps
Stenner Classic pumps are controlled by an adjustment ring, decreasing or increasing flow. These pumps are well suited to Accelerated Surface Finishing processes, waste treatment, and process requiring tight flowrate and concentration accuracy.
The Single Head Adjustable Output Pump is one of four types in Stenner's Classic Series and is an ideal choice for treating problem water. The pump can inject water treatment solutions for pH control or oxidize iron, hydrogen sulfide or manganese for removal by filtration. Disinfection, pH control or adjustment, corrosion and scale control and oxidation are common water treatment applications found in markets such as Water Conditioning, Animal Health, Industrial Process, Water and Wastewater, and Cooling Towers. The versatility of the product expands into other markets as well, such as Legionella prevention in Cooling Towers, sprinkler head cleaning in Irrigation and Horticulture and plating bath treatment in the Metal Finishing industry. The pumps are widely popular in the commercial pool industry for sanitising swimming pool water or maintaining the equipment. Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump or Contact Us.
OVERVIEW
HOW IT WORKS
The output is determined by three factors; the rpm of the motor gears, the setting on the feed rate control and the pump tube size. The feed rate control has an external dial ring that is labelled L to 10 offering an adjustable output range from 5% to 100% in 2.5% increments.
UNIQUE FEATURES
Interchangeable pump heads and tubes to convert one model to another without having to purchase a new pump.
Easy and fast tube replacement without tools with the QuickPro® pump head.
The pump is built with three detachable components; the motor, feed rate control and the pump head that can be separated without tools.
SUB SERIES
The 45 and 85 models are two sub-series within the Classic Series Single Head Pumps (Adjustable and Fixed) and below is a summary of the primary differences in the Adjustable models.
45 Series Adjustable
26 rpm
0.2-22.0 gpd up to 100 psi max.
(0.8-83.3 lpd up to 6.9 bar max.)
0.2-50.0 gpd up to 25 psi max.
(0.8-189.3 lpd up to 1.7 bar max.)
85 Series Adjustable
44 rpm
0.3-40.0 gpd up to 100 psi max.
(1.1-151.4 lpd up to 6.9 bar max.)
0.3-85.0 gpd up to 25 psi max.
(1.1-321.8 lpd up to 1.7 bar max.)
OUTPUT
NOTE: Injection check valve included with pumps rated 100 psi (6.9 bar) maximum.
NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.
SPECIFICATIONS
Maximum Operating Temperature - 125°F (52°C)
Maximum Suction Lift - 25 ft (7.6 m) vertical lift, based on water
Motor Type - 1/30 HP, shaded pole, class B
Duty Cycle - Continuous
Motor Voltage (Amp Draw)
120V 60Hz 1PH (1.7)
220V 60Hz 1PH (0.9)
230V 50Hz 1PH (0.9) INTERNATIONAL
250V 50Hz 1PH (0.9) INTERNATIONAL
Power Cord Type
SJTOW
Power Cord Plug End
120V 60Hz NEMA 5/15
220V 60Hz NEMA 6/15
230V 50Hz CEE 7/VII
250V 50Hz CEE 7/VII
MATERIALS OF CONSTRUCTION
All Housings - Polycarbonate
Pump Tube & Check Valve Duckbill - Santoprene®* FDA approved, Versilon®**
CV Duckbill with Versilon®** Tube - Pellethane®†
Pump Head Rollers - Polyethylene
Roller Bushings - Oil impregnated bronze
Suction/Discharge Tubing and Ferrules - Polyethylene, FDA approved
Tube and Injection Fittings - PVC or Polypropylene, NSF listed
Connecting Nuts - PVC, NSF listed
3/8" Adapter - PVC or Polypropylene, NSF listed
Suction Line Strainer - PVC listed, NSF listed, with ceramic weight
All Fasteners - Stainless steel
Pump Head Latches - Polypropylene
TECHNICAL DATA
Listings vary by model.
* Santoprene® is a registered trademark of Exxon Mobil Corporation.
** Versilon® is a registered trademark of Saint-Gobain Performance Plastics.
† Pellathane® is a registered trademark of Lubrizol Advanced Materials, Inc.
DIMENSIONS & WEIGHT
Shipping Weight: 9 lbs (4 kg)
Box Dimensions: 13 x 8 x 9 in. (33 x 20 x 23 cm)
PARTS