HZ-160
Centrifugal Barrel Finisher
The HZ-120 is a full sized industrial finishing machine. This CBF machine can be fully customized with a touchscreen control panel, parts separator, drain pan and infrared safety curtain. HZ High Energy series Centrifugal Barrel Finishing (CBF) systems from Mass Finishing are the fastest and most economical form of finishing machine available. They are the industry workhorse in polishing, deburring and deflashing parts. From jet engine blades in the aerospace industry to heart valves and medical implants, these tumbling machines are the versatile and money-saving solution for polishing and deburring.
Main Motor :
Voltage :
Total Capacity :
Approx Ship Weight :
Overall Dimensions :
Machine Construction :
10 HP Brand, Totally Enclosed , Three Phase, 60 hertz
230-460 volt-(Please Specify on Order)
4.7 cubic feet
2900 lbs. (Machine only)
66″L x 54″W x 76″H (machine only, No Cover Lift), 89”L x 40”W x 90” H (With Separator), 100” x 95” footprint with drain pan option
Heavy duty steel, All welded construction Reinforced, gusseted, and welded to maximum strength
Paint :
Barrel Construction :
Heavy duty powder coat, Scratch resistant
17.25”L x 10.25”W, Four hexagonal barrels with removable lids, Cam locks for secure operation
Control Panel :
NEMA 12 enclosed panel, UL Certification Available, ABB push buttons and switches, PLC Option Available, 0-100 Hour cycle timermounted on panel, Power jog of turret
Brake :
Automatically stops the turret when a stop is activated, or cycle is completed. Activated if door is opened
Saftey Interlock :
Prevents door from opening during operation, Machine must be powered on in an idle mode to disengage lock · Can only be opened after cycle is finished
Multiple Barrel Options
TWO SIDED BARREL
BOLT END BARREL
LATCH END BARREL
HALF SIZE BARRELS
LOOKING FOR MORE RESOURCES?
