© Precision Finishing Inc. 2018

Precision Finishing Inc.  |  1800 AM Drive Quakertown PA, 18951  |  E : info@precisionfinishinginc.com  |  O : 215.257.6862

Checker Industries   |   1280 Renton Rd, Pittsburgh, PA 15239   |   E : info@1800checker.com   |    O : 412.795.4414

a division of precision finishing

Providing affordable and intelligent wastewater treatment technology for small to large volume generators. The W.E., Inc. system is a very attractive alternative to haul away services and other treatment technologies. This system fits in well where a small waste stream is contaminating a larger stream and needs to be treated before being released into it. Our objective is to provide our clientele with results, which are simple, safe, and cost effective.

FLOCCULATION SYSTEMS

HOW IT WORKS

STAGE 1

 

The RT unit is filled with effluent. the turbine mixer is started and DH reactant is added. after five minutes of mixing a large floc will form. the mixer is stopped and settling of the floc to the bottom of the tank occurs, usually in a couple of minutes

STAGE 2

 

Once the settling or phasing of the floc has occurred, draining and filtering begins. Clarified water from the upper area of the tank is drained first, followed by the floc (Sludge). Filter media captures the solids, allowing the clarified water through a clean compartment. A discharge pump automatically transfers the fluids to sewer or recycling vessel.

STAGE 3

 

An automated conveyor advances the filter media and sludge as needed. This usually only requires five feet of filter media.  An included self-tipping gondola captures the filter media and sludge for disposal. The sludge dries to a cake, without the need of a filter press. the process is now complete. 

Don't go it alone! 

 

Contact us and we will be glad to go over the specifics with you! Our technical sales team services and consults in a broad applicational portfolio and will be happy to meet with you for onsite diagnosis.

LOOKING FOR MORE RESOURCES?

CERTIFIED

FINISHING SERVICES

Our Sub-Contract finishing services are held to PPAP, ISO, FFL, MIL, SAE, and other tight industry standards. Our services include shot peening, vibratory finishing, industrial washing, accelerated surface finishing and more.

PROCESS
DEVELOPMENT

Our process development team will help diagnose your project or application at hand, bringing over 250+ years of combined industry experience. utilizing our finishing facilities, come experience first hand the process and equipment before delivery. 

CHEMTROL
COMPOUNDS

With 150 chemical compounds to choose from, Chemtrol Compounds is a division of Precision Finishing and manufacture aqueous compounds specifically for the mass finishing industry including washing, vibratory finishing, cleaning, and much more.